Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2001SUBURBAN C1500REPAIR AND DIAGNOSIS (SINGLE PAGE)BRAKESTRACTION CONTROLANTI-LOCK BRAKE SYSTEMSPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2001 Chevrolet Suburban C1500
Fastener Tightening Specifications
2001 Chevrolet Suburban C1500SECTION Fastener Tightening Specifications
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Brake Fluid Pressure Sensor | 16 N.m | 12 lb ft |
| EBCM to BPMV | 5 N.m | 39 lb in |
| EHCU Bracket Mounting Bolts | 25 N.m | 18 lb ft |
| EHCU to Bracket | 9 N.m | 7 lb ft |
| Front Brake Lines to BPMV | 24 N.m | 18 lb ft |
| Front Wheel Speed Sensor Mounting Bolt | 13 N.m | 115 lb in |
| Master Cylinder Brake Lines to BPMV | 24 N.m | 18 lb ft |
| Pressure Accumulator Switch | 3 N.m | 30 lb in |
| Rear Brake Line to BPMV | 24 N.m | 18 lb in |
| Steering Knuckle to Front Hub/Bearing Mounting Bolts | 180 N.m | 133 lb ft |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.