Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2001SUBURBAN C1500REPAIR AND DIAGNOSIS (SINGLE PAGE)BODY & FRAMESEATSPOWER SEAT SYSTEMREPAIR INSTRUCTIONSMEMORY SEAT CONTROL MODULE REPLACEMENTINSTALLATION PROCEDURE
2001 Chevrolet Suburban C1500
Installation Procedure
2001 Chevrolet Suburban C1500SECTION Installation Procedure
- Slide the module in until seated.
- Refer to Fastener Notice
in Cautions and Notices.
Install the memory module retaining screws (1).
Tighten
Tighten the screws to 3 N.m (26 lb in).
- Connect the harness connectors (2).
- Install the seat cushion. Refer to Driver or Passenger Seat Cushion Frame Replacement .
- Install the seat trim panel. Refer to Front Seat Trim Panel Replacement .
- If you installed a new memory seat, calibrate the seat. Refer to Memory Seat Calibration .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.