SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2001S10 PICKUP 2D PICKUP, 2.2 5, AUTOMATICREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 867 (HEATING, VENTILATION AND AIR CONDITIONING)SPECIFICATIONSREFRIGERANT SYSTEM CAPACITIES
2001 Chevrolet S10 Pickup 2D Pickup, 2.2 5, Automatic

Refrigerant System Capacities

2001 Chevrolet S10 Pickup 2D Pickup, 2.2 5, AutomaticSECTION Refrigerant System Capacities
WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
Refrigerant System Capacities

Application Specification
Metric English
PAG Oil Saturn P/N 22695048
Abrupt Refrigerant Loss 103 ml1 3.5 oz1
Compressor Replacement
  • The Visteon model SC105V service compressor is precharged with the specified amount of PAG oil. - 2.2L (L61)
 120 ml2 4 oz2
  • The Visteon model SC100V service compressor is precharged with the specified amount of PAG oil. - 3.5L (L66)
 120 ml2 4 oz2
Condenser Replacement 30 ml2 1 oz2
Evaporator Replacement 30 ml2 1 oz2
Receiver/Dehydrator Replacement 60 ml3 2 oz3
Thermal Expansion Valve Replacement 20 ml2 0.75 oz2
  • Total System PAG Oil Capacity
 207 ml 7.00 oz
R-134a
  • Refrigerant Charge - 2.2L (L61)
 0.68 kg 1.5 lb
  • Refrigerant Charge - 3.5L (L66)
 0.79 kg 1.75 lb
2 If more than the specified amount of PAG oil was drained from a component, add the equal amount of oil drained.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.