Valve Lifter Installation

2001 Chevrolet Chevy Express G3500, Van Passenger Extended, 6.5 FSECTION Valve Lifter Installation
WARNING: This page is about a different variant/trim than selected.
  1. Apply lubricant GM P/N United States 12345501, GM P/N Canada 992704, or equivalent, to the valve lifter rollers.

    Important:Β  If reusing the valve lifters, install the valve lifters in the original positions.

  2. Install the valve lifters.
    Fig 1: Valve Lifters
    G02503094Courtesy of GENERAL MOTORS CORP.
  3. Install the valve lifter pushrod guides. Tighten the valve lifter pushrod guide bolts to 16 N.m (12 lb ft).
    Fig 2: Valve Lifter Pushrod Guides
    G02503095Courtesy of GENERAL MOTORS CORP.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.