Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Electric Rear Defogger
When the rear defog switch input circuit 292 to the BCM is momentarily switched to ground, as when the rear defog switch is pressed, the BCM will respond by grounding circuit 193, the coil of the rear defog relay.
This action energizes the rear defog relay providing power to circuit 293 - rear defog heater elements, circuit 683 - heated mirror relay coil and circuit 683 - rear defog LED. Momentarily switching circuit 292 to ground again will result in the BCM turning the rear defog relay OFF.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.