SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2001CHEVY EXPRESS G3500, VAN PASSENGER EXTENDED, 6.5 FREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 719 (SUSPENSION CONTROL SYSTEM - SUSPENSION DAMPING)COMPONENT LOCATORSUSPENSION CONTROLS CONNECTOR END VIEWS
2001 Chevrolet Chevy Express G3500, Van Passenger Extended, 6.5 F

Suspension Controls Connector End Views

2001 Chevrolet Chevy Express G3500, Van Passenger Extended, 6.5 FSECTION Suspension Controls Connector End Views
WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
Electronic Suspension Control (ESC) Module Terminal Identification C1

GM39787Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 12129025
  • 32-Way F Micro-Pack 100 Series (GRY)
Pin Wire Color Circuit No. Function
1 LT BLU 1107 Left Front Damper Control
2 - - Not Used
3 TAN/WHT 1207 Left Front Suspension Position Sensor Signal
4 PPL/WHT 1205 Left Front Suspension Position Sensor Voltage Reference
5 - 10 - - Not Used
11 LT BLU 2627 Steering Position Sensor Signal
12 - - Not Used
13 TAN/WHT 1213 Right Front Suspension Position Sensor Signal
14 PPL/WHT 1211 Right Front Suspension Position Sensor Voltage Reference
15 - - Not Used
16 GRY 1117 Right Front Damper Low Reference
17 GRY 1113 Left Front Damper Low Reference
18 - - Not Used
19 LT BLU/BLK 1206 Left Front Suspension Position Sensor Low Reference
20 - 28 - - Not Used
29 LT BLU/BLK 1212 Right Front Suspension Position Sensor Low Reference
30- 31 - - Not Used
32 LT BLU 1116 Right Front Damper Control
Electronic Suspension Control (ESC) Module Terminal Identification C2

GM39784Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 12129225
  • 24 Way F Micro-Pack 100 Series (BLK)
Pin Wire Color Circuit No. Function
1 DK BLU/WHT 1114 Left Rear Damper Control
2 - - Not Used
3 LT GRN/WHT 1210 Left Rear Suspension Position Sensor Signal
4 RED/BLK 1208 Left Rear Suspension Position Sensor Voltage Reference
5 TAN/WHT 1384 Selective Ride Control Switch Signal
6 DK BLU/WHT 1126 SCM (Suspension) Class 2 Serial Data
7 - 8 - - Not Used
9 LT GRN/WHT 1216 Right Rear Suspension Position Sensor Signal
10 RED/BLK 1214 Right Rear Suspension Position Sensor Voltage Reference
11 - - Not Used
12 DK GRN 1119 Right Rear Damper Low Reference
13 DK GRN 1115 Left Rear Damper Low Reference
14 - - Not Used
15 LT GRN/BLK 1209 Left Rear Suspension Position Sensor Low Reference
16 - - Not Used
17 PNK/BLK 1385 Selective Ride Control Switch Low Reference
18 - 19 - - Not Used
20 PNK/WHT 1101 Damping Lift/Dive Signal
21 LT GRN/BLK 1215 Right Rear Suspension Position Sensor Low Reference
22 - 23 - - Not Used
24 DK BLU/WHT 1118 Right Rear Damper Control
Electronic Suspension Control (ESC) Module Terminal Identification C3

GM832586Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 12146741
  • 5-Way F Metri-Pack 280 Series (NAT)
Pin Wire Color Circuit No. Function
A - - Not Used
B RED 1842 Battery Positive Voltage
C BRN 641 Ignition 3 Voltage
D BLK 1351 Ground
E - - Not Used
Suspension Damper Terminal Identification - LF

GM287974Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 15305168
  • 2-Way F Metri-Pack 150 Series (GRY)
Pin Wire Color Circuit No. Function
A LT BLU/WHT 1107 Left Front Damper Control
B GRY 1113 Left Front Damper Low Reference
Suspension Damper Terminal Identification - RF

GM287974Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 15305168
  • 2-Way F Metri-Pack 150 Series (GRY)
Pin Wire Color Circuit No. Function
A LT BLU/WHT 1116 Right Front Damper Control
B GRY 1117 Right Front Damper Low Reference
Suspension Damper Terminal Identification - LR

GM287974Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 15305168
  • 2-Way F Metri-Pack 150 Series (BLK)
Pin Wire Color Circuit No. Function
A RED 901 Left Rear Damper Control
B BLK 902 Left Rear Damper Low Reference
Suspension Damper Terminal Identification - RR

GM287974Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 15305168
  • 2-Way F Metri-Pack 150 Series (BLK)
Pin Wire Color Circuit No. Function
A RED 901 Right Rear Damper Control
B BLK 902 Right Rear Damper Low Reference
Suspension Position Sensor Terminal Identification - LF

GM655690Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 12129615
  • 3-Way M Metri-Pack 150 Series (BLK)
Pin Wire Color Circuit No. Function
A PPL/WHT 1205 Left Front Suspension Position Sensor Voltage Reference
B TAN/WHT 1207 Left Front Suspension Position Sensor Signal
C LT BLU/BLK 1206 Left Front Suspension Position Sensor Low Reference
Suspension Position Sensor Terminal Identification - RF

GM655690Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 12129615
  • 3-Way M Metri-Pack 150 Series (BLK)
Pin Wire Color Circuit No. Function
A PPL/WHT 1211 Right Front Suspension Position Sensor Voltage Reference
B TAN/WHT 1213 Right Front Suspension Position Sensor Signal
C LT BLU/BLK 1212 Right Front Suspension Position Sensor Low Reference
Suspension Position Sensor Terminal Identification - LR

GM655690Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 12129615
  • 3-Way M Metri-Pack 150 Series (BLK)
Pin Wire Color Circuit No. Function
A RED/BLK 1208 Left Rear Suspension Position Sensor Voltage Reference
B LT GRN/WHT 1210 Left Rear Suspension Position Sensor Signal
C LT GRN/BLK 1209 Left Rear Suspension Position Sensor Low Reference
Suspension Position Sensor Terminal Identification - RR

GM655690Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 12129615
  • 3-Way M Metri-Pack 150 Series (BLK)
Pin Wire Color Circuit No. Function
A RED/BLK 1214 Right Rear Suspension Position Sensor Voltage Reference
B LT GRN/WHT 1216 Right Rear Suspension Position Sensor Signal
C LT GRN/BLK 1215 Right Rear Suspension Position Sensor Low Reference
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.