Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2001CHEVY EXPRESS G3500, VAN PASSENGER EXTENDED, 6.5 FREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 692 (ENGINE MECHANICAL - 3.8L (UNIT REPAIR))REPAIR INSTRUCTIONSENGINE BLOCK PLUG REMOVAL
2001 Chevrolet Chevy Express G3500, Van Passenger Extended, 6.5 F
Engine Block Plug Removal
2001 Chevrolet Chevy Express G3500, Van Passenger Extended, 6.5 FSECTION Engine Block Plug Removal
WARNING: This page is about a different car, the 2002 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the threaded coolant jacket plugs.
- Remove the remaining plugs using the following procedure.
- 2.1. Obtain a suitable self-threading screw.
- 2.2. Drill a hole into the plug.
- 2.3. Install the self-threading screw.
- 2.4. Use the screw to pry out the plug.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.