Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DBβ LIVE
HOMESERVICE MANUALSCHEVROLET2001CHEVY EXPRESS G3500, VAN PASSENGER EXTENDED, 6.5 FREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 561 (AUTOMATIC TRANSAXLE - 4T65-E (INTRODUCTION, SERVICE & REPLACEMENT))SPECIFICATIONSTRANSMISSION FLUID TEMPERATURE (TFT) SENSOR SPECIFICATIONS
2001 Chevrolet Chevy Express G3500, Van Passenger Extended, 6.5 F
Transmission Fluid Temperature (TFT) Sensor Specifications
2001 Chevrolet Chevy Express G3500, Van Passenger Extended, 6.5 FSECTION Transmission Fluid Temperature (TFT) Sensor Specifications
WARNING: This page is about a different car, the 2004 Pontiac Aztek and 2004 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
Transmission Fluid Temperature (TFT) Sensor Specifications
| Temperature | Temperature | Minimum Resistance | Nominal Resistance | Maximum Resistance | Signal |
|---|---|---|---|---|---|
| Β°F | Β°C | Ξ© | Ξ© | Ξ© | Volts |
| -40 | -40 | 90636 | 100707 | 110778 | 5.00 |
| -22 | -30 | 47416 | 52684 | 57952 | 4.78 |
| -4 | -20 | 25809 | 28677 | 31545 | 4.34 |
| 14 | -10 | 14558 | 16176 | 17794 | 3.89 |
| 32 | 0 | 8481 | 9423 | 10365 | 3.45 |
| 50 | 10 | 5104 | 5671 | 6238 | 3.01 |
| 68 | 20 | 3164 | 3515 | 3867 | 2.56 |
| 86 | 30 | 2013 | 2237 | 2461 | 1.80 |
| 104 | 40 | 1313 | 1459 | 1605 | 1.10 |
| 122 | 50 | 876 | 973 | 1070 | 3.25 |
| 140 | 60 | 600 | 667 | 734 | 2.88 |
| 158 | 70 | 420 | 467 | 514 | 2.56 |
| 176 | 80 | 299 | 332 | 365 | 2.24 |
| 194 | 90 | 217 | 241 | 265 | 1.70 |
| 212 | 100 | 159 | 177 | 195 | 1.42 |
| 230 | 110 | 119 | 132 | 145 | 1.15 |
| 248 | 120 | 89.9 | 99.9 | 109.9 | 0.87 |
| 266 | 130 | 69.1 | 76.8 | 84.5 | 0.60 |
| 284 | 140 | 53.8 | 59.8 | 65.8 | 0.32 |
| 302 | 150 | 42.5 | 47.2 | 51.9 | 0.00 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.