Installation Procedure

2001 Chevrolet Chevy Express G3500, Van Passenger Extended, 6.5 FSECTION Installation Procedure
WARNING: This page is about a different car, the 2002 Buick Regal and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the inflatable restraint, left side impact module, if equipped. Refer to REMOVAL & INSTALLATION (SIDE IMPACT) .
  2. Install the front seat back pad to the front seat back frame. Refer to Seat Back Pad Replacement - FrontΒ .
  3. Install the front seat back. Refer to Seat Back Replacement - Front (Split Bench)Β  or Seat Back Replacement - Front (Bucket Seat)Β  .
    Fig 1: Identifying Seat Back Frame
    G01756116Courtesy of GENERAL MOTORS CORP.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.