Tire Pressure Monitoring Reset

2001 Chevrolet Chevy Express G3500, Van Passenger Extended, 6.5 FSECTION Tire Pressure Monitoring Reset
WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inflate all tires to proper pressure.
  2. Turn ignition switch to RUN position.
  3. On DIC, press SELECT (right arrow) until GAGE is displayed.
  4. Press SELECT (down arrow) until TIRE PRESSURE is displayed.
  5. Press and hold RESET button until TIRE PRESSURE RESET is displayed.
  6. When RESET button is released, TIRE PRESSURE NORMAL is displayed. Using scan tool, clear DTC C1245.
  7. Scan tool can be used to reset TPM system.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.