Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2001CHEVY EXPRESS G3500, VAN PASSENGER EXTENDED, 6.5 FREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 105 (AUTOMATIC TRANSAXLE SERVICING)REMOVAL & INSTALLATIONSHIFT CABLE (COLUMN SHIFT)INSTALLATION
2001 Chevrolet Chevy Express G3500, Van Passenger Extended, 6.5 F
Shift Cable (Column Shift): Installation
2001 Chevrolet Chevy Express G3500, Van Passenger Extended, 6.5 FSECTION Installation
WARNING: This page is about a different car, the 2003 Cadillac Seville and 2003 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.
- Install the shift cable through the cowl panel and seat the grommet. See Figure . Slide the transaxle range selector cable (2) fully into the bracket until it snaps into place. See Figure .
- Connect the transaxle range selector cable terminal to the shift lever pin. See Figure . Install the retainer to the transaxle range selector cable mechanism.
- Install the left closeout/insulator panel. See appropriate SHIFT INTERLOCK SYSTEMS article. Insert the transaxle range selector cable into the bracket. Connect the transaxle range selector cable terminal to the transaxle manual shift lever pin. See Figure .
- Install the retainer to the transaxle range selector cable mechanism. See Figure . Adjust the automatic transmission range selector cable. See SHIFT CABLE under ADJUSTMENTS.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.