Diagnostic Trouble Code (DTC) List

2001 Chevrolet Chevy Express G2500, Van Passenger Extended, 5.0 MSECTION Diagnostic Trouble Code (DTC) List
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2001 GMC Yukon XL, 2001 GMC Yukon, 2001 GMC Sierra, 2001 GMC Cab & Chassis Sierra, and 2001 GMC C3500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Diagnostic Trouble Code (DTC) List

DTC Diagnostic Procedure Definition Module(s)
C0221 DTC C0221-C0227 or C021  Front Wheel Speed Sensor Circuit EBCM
C0222 DTC C0221-C0227 or C021  Front Wheel Speed Sensor Circuit EBCM
C0223 DTC C0221-C0227 or C021  Front Wheel Speed Sensor Circuit EBCM
C0225 DTC C0221-C0227 or C021  Front Wheel Speed Sensor Circuit EBCM
C0226 DTC C0221-C0227 or C021  Front Wheel Speed Sensor Circuit EBCM
C0227 DTC C0221-C0227 or C021  Front Wheel Speed Sensor Circuit EBCM
C0229 DTC C0229 or C029  Drop Out of Front Wheel Speed Signals EBCM
C0235 DTC C0235-C0237, C035-C037, or P1504  Rear Wheel Speed Sensor Circuit EBCM
C0236 DTC C0235-C0237, C035-C037, or P1504  Rear Wheel Speed Sensor Circuit EBCM
C0237 DTC C0235-C0237, C035-C037, or P1504  Rear Wheel Speed Sensor Circuit EBCM
C0238 DTC C0238 or C038  Wheel Speed Mismatch EBCM
C0241 DTC C0241-C0254 or C041-C054  EBCM Control Valve Circuit EBCM
C0242 DTC C0241-C0254 or C041-C054  EBCM Control Valve Circuit EBCM
C0243 DTC C0241-C0254 or C041-C054  EBCM Control Valve Circuit EBCM
C0244 DTC C0241-C0254 or C041-C054  EBCM Control Valve Circuit EBCM
C0245 DTC C0241-C0254 or C041-C054  EBCM Control Valve Circuit EBCM
C0246 DTC C0241-C0254 or C041-C054  EBCM Control Valve Circuit EBCM
C0247 DTC C0241-C0254 or C041-C054  EBCM Control Valve Circuit EBCM
C0248 DTC C0241-C0254 or C041-C054  EBCM Control Valve Circuit EBCM
C0251 DTC C0241-C0254 or C041-C054  EBCM Control Valve Circuit EBCM
C0252 DTC C0241-C0254 or C041-C054  EBCM Control Valve Circuit EBCM
C0253 DTC C0241-C0254 or C041-C054  EBCM Control Valve Circuit EBCM
C0254 DTC C0241-C0254 or C041-C054  EBCM Control Valve Circuit EBCM
C0265 DTC C0265 or C0266 and C065 or C066  EBCM Relay Circuit EBCM
C0266 DTC C0265 or C0266 and C065 or C066  EBCM Relay Circuit EBCM
C0267 DTC C0267 or C0268 and C067 or C068  Pump Motor Circuit Open/Shorted EBCM
C0268 DTC C0267 or C0268 and C067 or C068  Pump Motor Circuit Open/Shorted EBCM
C0269 DTC C0269 or C0274 and C069 or C074  Excessive Dump/Isolation Time EBCM
C0271 DTC C0271-C0273, C0284  EBCM Malfunction EBCM
C0272 DTC C0271-C0273, C0284  EBCM Malfunction EBCM
C0273 DTC C0271-C0273, C0284  EBCM Malfunction EBCM
C0274 DTC C0269 or C0274 and C069 or C074  Excessive Dump/Isolation Time EBCM
C0279 DTC C0279  Powertrain Configuration Not Valid EBCM, PCM
C0281 DTC C0281 or C081  Brake Switch Circuit EBCM
C0283 DTC C0283 (w/NW7)  Traction Switch Shorted to Ground EBCM
C0284 DTC C0271-C0273, C0284  EBCM Malfunction EBCM
C0287 DTC C0287, P1644, or P1689  Delivered Torque Circuit EBCM, PCM
C0290 DTC C0290 or C0292  Lost Communications With PCM EBCM, PCM
C0292 DTC C0290 or C0292  Lost Communications With PCM EBCM, PCM
C0297 DTC C0297  Powertrain Configuration Data Not Received EBCM, PCM
C0298 DTC C0298 or P1571  Powertrain Indicated Traction Control Malfunction EBCM, PCM
P1571 DTC C0298 or P1571  Powertrain Indicated Traction Control Malfunction EBCM, PCM
P1644 DTC C0287, P1644, or P1689  Delivered Torque Circuit EBCM, PCM
P1689 DTC C0287, P1644, or P1689  Delivered Torque Circuit EBCM, PCM
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.