Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2001CHEVY EXPRESS G2500, VAN PASSENGER EXTENDED, 5.0 MREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 921 (POWER SEAT SYSTEM)COMPONENT LOCATORPOWER SEAT CONNECTOR END VIEWSSEAT ADJUSTER SWITCH - DRIVER
2001 Chevrolet Chevy Express G2500, Van Passenger Extended, 5.0 M
Seat Adjuster Switch - Driver
2001 Chevrolet Chevy Express G2500, Van Passenger Extended, 5.0 MSECTION Seat Adjuster Switch - Driver
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2001 GMC Yukon XL, 2001 GMC Yukon, 2001 GMC Sierra, 2001 GMC Cab & Chassis Sierra, and 2001 GMC C3500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Seat Adjuster Switch - Driver
| Connector Part Information |
|
||
|---|---|---|---|
| Pin | Wire Color | Circuit No. | Function |
| A | DK GRN | 286 | Driver Seat Front Vertical Motor Up Control |
| B | DK BLU | 287 | Driver Seat Front Vertical Motor Down Control |
| C | YEL | 282 | Driver Seat Rear Vertical Motor Up Control |
| D | LT BLU | 283 | Driver Seat Rear Vertical Motor Down Control |
| E | BLK | 2350 | Ground |
| F | LT GRN | 284 | Driver Seat Horizontal Motor Rearward Control |
| G | TAN | 285 | Driver Seat Horizontal Motor Forward Control |
| H | ORN | 1440 | Fused Battery Positive Voltage |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.