Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2001CHEVY EXPRESS G2500, VAN PASSENGER EXTENDED, 5.0 MREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 916 (INSTRUMENT PANEL SYSTEM DISPLAYS, GAUGES AND CONSOLE)SPECIFICATIONSFASTENER TIGHTENING SPECIFICATIONS
2001 Chevrolet Chevy Express G2500, Van Passenger Extended, 5.0 M
Fastener Tightening Specifications
2001 Chevrolet Chevy Express G2500, Van Passenger Extended, 5.0 MSECTION Fastener Tightening Specifications
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2001 GMC Yukon XL, 2001 GMC Yukon, 2001 GMC Sierra, 2001 GMC Cab & Chassis Sierra, and 2001 GMC C3500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Ashtray Housing Screws | 2 N.m | 18 lb in |
| Console Compartment Door Screws | 1.6 N.m | 14 lb in |
| Console Extension Trim Bezel Screws | 2 N.m | 18 lb in |
| Data Link Connectors (DLC) Screws | 2 N.m | 18 lb in |
| DIC and Power Outlet Bracket Screws | 1.6 N.m | 14 lb in |
| Engine Oil Level Sensor | 25 N.m | 18 lb ft |
| Engine Oil Pressure Sensor (4.3L) | 15 N.m | 11 lb ft |
| Engine Oil Pressure Sensor (4.8L, 5.3L, 6.0L, 8.0L) | 20 N.m | 15 lb ft |
| Engine Oil Pressure Sensor (6.6L) | 30 N.m | 22 lb ft |
| Floor Console End Panel Screws | 1.6 N.m | 14 lb in |
| Floor Console to Console Extension Screws | 1.6 N.m | 14 lb in |
| Floor Console to the Floor Console Bracket Bolts | 3.5 N.m | 31 lb in |
| Floor Console Storage Bin Screws | 1.6 N.m | 14 lb in |
| Instrument Panel Assembly to Carrier Support Screws and Nuts | 9 N.m | 80 lb in |
| Instrument Panel Carrier Side Bolts | 50 N.m | 37 lb ft |
| Instrument Panel Carrier Top Bolts | 50 N.m | 37 lb ft |
| Instrument Panel Center Support Bracket Bolt | 25 N.m | 18 lb ft |
| Instrument Panel Cluster Screws | 1.6 N.m | 14 lb in |
| Instrument Panel Compartment Screws | 1.9 N.m | 17 lb in |
| Instrument Panel Cupholder Screws | 2 N.m | 18 lb in |
| Instrument Panel to Console Extension Screws | 2 N.m | 18 lb in |
| Instrument Panel Trim Pad Retaining Screws | 2 N.m | 18 lb in |
| Instrument Panel Upper Bracket Bolts | 2 N.m | 18 lb in |
| Knee Bolster Deflector Nuts | 9 N.m | 80 lb in |
| Knee Bolster Screws | 2 N.m | 18 lb in |
| Lower Instrument Panel Trim Panel Screws | 2 N.m | 18 lb in |
| Power Outlet Cover Screws | 1.6 N.m | 14 lb in |
| Underhood Ground and Connection Nut | 9 N.m | 80 lb in |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.