Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2001CHEVY EXPRESS G2500, VAN PASSENGER EXTENDED, 5.0 MREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 907 (ENGINE MECHANICAL - 4.3L - UNIT REPAIR OVERHAUL)COMPONENT LOCATORDISASSEMBLED VIEWSUPPER AND LOWER INTAKE MANIFOLD VIEW
2001 Chevrolet Chevy Express G2500, Van Passenger Extended, 5.0 M
Upper and Lower Intake Manifold View
2001 Chevrolet Chevy Express G2500, Van Passenger Extended, 5.0 MSECTION Upper and Lower Intake Manifold View
WARNING: This page is about a different car, the 2001 GMC Sierra and 2001 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Fuel Pipe Retainer Bracket Nut |
| 2 | Fuel Pipe Retainer |
| 3 | Fuel Pipe |
| 4 | Fuel Pipe Bolt |
| 5 | Fuel Seal Retainer |
| 6 | Upper Fuel Seal (Yellow O-ring) |
| 7 | Spacer Ring (Metal Flat Washer) |
| 8 | Lower Fuel Seal (Black O-ring) |
| 9 | Upper Manifold Attaching Stud |
| 10 | Upper Intake Manifold |
| 11 | Upper Intake to Lower Intake Manifold Gasket |
| 12 | Fuel Meter Body Seal (O-ring) |
| 13 | Fuel Meter Body |
| 14 | Intake Manifold |
| 15 | Throttle Body to Upper Intake Manifold Gasket |
| 16 | Throttle Body |
| 17 | Throttle Body Attaching Stud |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.