SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2001CHEVY EXPRESS G2500, VAN PASSENGER EXTENDED, 5.0 MREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 878 (ENGINE CONTROLS - 8.1L - REPAIR INSTRUCTIONS)REPAIR INSTRUCTIONSELECTRONIC THROTTLE ACTUATOR CONTROL MODULE REPLACEMENTINSTALLATION PROCEDURE
2001 Chevrolet Chevy Express G2500, Van Passenger Extended, 5.0 M

Installation Procedure

2001 Chevrolet Chevy Express G2500, Van Passenger Extended, 5.0 MSECTION Installation Procedure
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2001 GMC Yukon XL, 2001 GMC Sierra, 2001 GMC Cab & Chassis Sierra, 2001 GMC C3500 HD, and 2001 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: TAC Module Electrical Connectors
    GM599659Courtesy of GENERAL MOTORS COMPANY
  1. Connect the TAC module harness connectors to the TAC module.
  2. Slide the TAC module into the TAC module bracket.
  3. Push the TAC module towards the bracket in order to snap the TAC module into the bracket.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.