Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Diagnostic Aids
This DTC informs the technician that the customer has initiated the customer-snapshot function. The PCM will store up to 6 snapshots in the failure records before over-writing the first recorded snapshot. The customer-snapshot function may help to diagnose conditions which could not be duplicated during previous diagnosis.
If no other DTCs are set, the problem is most likely intermittent. See INTERMITTENT CONDITIONS under SELF-DIAGNOSTIC SYSTEM.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.