Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2001CHEVY EXPRESS G2500, VAN PASSENGER EXTENDED, 5.0 MREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 202 (ENGINE CONTROLS - REMOVAL & INSTALLATION)IGNITION SYSTEMSIGNITION COILREMOVAL
2001 Chevrolet Chevy Express G2500, Van Passenger Extended, 5.0 M
Ignition Coil: Removal
2001 Chevrolet Chevy Express G2500, Van Passenger Extended, 5.0 MSECTION Removal
WARNING: This page is about a different car, the 2003 GMC Safari and 2003 Chevrolet Astro. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition off. Remove engine cover. See ENGINE COVER under AIR INDUCTION SYSTEMS. Disconnect harness connectors from ignition coil. Slightly twist ignition coil wire at ignition coil. See Fig 1 . Remove ignition coil wire at ignition coil by pulling on the wire boot.
- Remove ignition coil mounting studs. See Fig 2 . Remove ignition coil assembly. Drill and punch out the 2 rivets holding the ignition coil to the bracket. See Fig 3 . Remove ignition coil from bracket.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.