Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2001CHEVY EXPRESS G2500, VAN PASSENGER EXTENDED, 5.0 MREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 189 (AUTOMATIC TRANSMISSION REMOVAL & INSTALLATION)REMOVAL & INSTALLATIONENGINE SUPPORT FIXTUREINSTALLATION
2001 Chevrolet Chevy Express G2500, Van Passenger Extended, 5.0 M
Engine Support Fixture: Installation
2001 Chevrolet Chevy Express G2500, Van Passenger Extended, 5.0 MSECTION Installation
WARNING: This page is about a different car, the 2003 Pontiac Aztek, 2003 Buick Rendezvous, 2002 Pontiac Aztek, and 2002 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the right engine mount strut. See ENGINE MOUNT STRUT .
- Install the Engine Support Bar Assembly (J-45057) to the right engine mount strut bracket (1). See Fig 1 .
- Install the engine support bar assembly to the left side engine lift bracket. See Fig 2 .
- Install the engine support bar assembly to the right rear engine lift bracket. See Fig 3 .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.