Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2001CHEVY EXPRESS G2500, VAN PASSENGER EXTENDED, 5.0 MREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 144 (BODY CONTROL MODULES)REMOVAL & INSTALLATIONDOOR MODULEREMOVAL & INSTALLATION
2001 Chevrolet Chevy Express G2500, Van Passenger Extended, 5.0 M
Removal & Installation
2001 Chevrolet Chevy Express G2500, Van Passenger Extended, 5.0 MSECTION Removal & Installation
WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
This procedure includes all door modules.
- Remove door trim panel. See DOOR LOCKS - AURORA article.
- Disconnect harness connectors and remove door trim panel. Disconnect harness connectors from door module. Remove door module fasteners and door module. See Fig 1.
- To install, reverse removal procedure. Tighten door module fasteners to 62 INCH Lbs. (7 N.m).
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.