Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2001CHEVY EXPRESS G2500, VAN CARGO EXTENDED, 5.7 R, L31/KL8REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 847 (REAR DRIVE AXLE)COMPONENT LOCATORREAR AXLE DISASSEMBLED VIEWS
2001 Chevrolet Chevy Express G2500, Van Cargo Extended, 5.7 R, L31/KL8
Rear Axle Disassembled Views
2001 Chevrolet Chevy Express G2500, Van Cargo Extended, 5.7 R, L31/KL8SECTION Rear Axle Disassembled Views
WARNING: This page is about a different car, the 2003 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Nut |
| 2 | Input Flange |
| 3 | Dust Shield |
| 4 | Oil Seal |
| 5 | Drain Plug |
| 6 | Plug |
| 7 | Bolt |
| 8 | Shield |
| 9 | Bolt |
| 10 | Clutch Cover |
| 11 | Bearing |
| 12 | Snap Ring |
| 13 | Seal |
| 14 | Clutch Drum |
| 15 | Pinion Nut |
| 16 | Bearing |
| 17 | Cup |
| 18 | Seal |
| 19 | Filter |
| 20 | Mount |
| 21 | Axle Seals |
| 22 | Hollow Dowel |
| 23 | Differential Carrier |
| 24 | Cup |
| 25 | Collapsible Spacer |
| 26 | Bearing |
| 27 | Shim |
| 28 | Pinion Gear |
| 29 | Shim |
| 30 | Cup |
| 31 | Differential Carrier Assembly |
| 32 | Cover |
| 33 | Bolt |
| 34 | Fill Plug |
| 35 | Vent |
| 36 | Nut |
| 37 | Bracket |
| 38 | Bolt |
| Callout | Component Name |
|---|---|
| 1 | Bearing |
| 1 | Bearing |
| 2 | Bolt |
| 3 | Pinion Shaft Pin |
| 4 | Differential Case |
| 5 | Pinion Shaft Lock Pin |
| 6 | Ring Gear |
| 7 | Washer |
| 7 | Washer |
| 8 | Axle Side Gear |
| 8 | Axle Side Gear |
| 9 | Washer |
| 9 | Washer |
| 10 | Pinion Gears |
| 10 | Pinion Gears |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.