Installation Procedure

2001 Chevrolet Chevy Express G2500, Van Cargo Extended, 5.7 R, L31/KL8SECTION Installation Procedure
WARNING: This page is about a different car, the 2003 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the front seat cushion pad to the front seat cushion frame.
  2. If equipped, install the seat heater wire.
  3. Install the front seat cushion cover. Refer to SEAT CUSHION COVER REPLACEMENT - FRONTΒ  .
  4. Install the front seat trim panel. Refer to TRIM PANEL REPLACEMENT - FRONT SEATΒ  .
  5. Install the front seat. Refer to SEAT REPLACEMENT - FRONT BUCKETΒ  .
    Fig 1: Installing Front Seat Cushion Pad To Front Seat Cushion Frame
    G01504355Courtesy of GENERAL MOTORS CORP.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.