Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSCHEVROLET2001CHEVY EXPRESS G2500, VAN CARGO EXTENDED, 5.7 R, L31/KL8REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 679 (SEAT SYSTEM)REPAIR INSTRUCTIONSSEAT CUSHION FRAME REPLACEMENT - FRONTINSTALLATION PROCEDURE

2001 Chevrolet Chevy Express G2500, Van Cargo Extended, 5.7 R, L31/KL8

Installation Procedure

2001 Chevrolet Chevy Express G2500, Van Cargo Extended, 5.7 R, L31/KL8SECTION Installation Procedure

WARNING: This page is about a different car, the 2003 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.

Position the front seat cushion frame to the front seat adjusters.
NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
Install the bolts to the seat frame to the front seat track adjusters.
Tighten

Tighten the bolts to the front seat frame to 25 N.m (18 lb ft).
Install the front seat recliner assembly to the front seat cushion frame. Refer to SEAT BACK RECLINER REPLACEMENT - FRONT .
Install the front seat cushion to the front seat cushion frame. Refer to SEAT CUSHION REPLACEMENT - FRONT .
Install the front seat cushion cover to the front seat cushion. Refer to SEAT CUSHION COVER REPLACEMENT - FRONT .
Install the front seat back to the front seat. Refer to SEAT BACK REPLACEMENT - FRONT .
Install the front seat to the vehicle. Refer to SEAT REPLACEMENT - FRONT BUCKET .

Fig 1: Installing Front Seat Cushion Frame To Front Seat Adjusters
Courtesy of GENERAL MOTORS CORP.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.