Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2001CHEVY EXPRESS G2500, VAN CARGO EXTENDED, 5.7 R, L31/KL8REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 484 (ENTERTAINMENT SYSTEM)SPECIFICATIONS
2001 Chevrolet Chevy Express G2500, Van Cargo Extended, 5.7 R, L31/KL8
Section 484 (Entertainment System): Specifications
2001 Chevrolet Chevy Express G2500, Van Cargo Extended, 5.7 R, L31/KL8SECTION Specifications
WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Amplifier Retaining Bolts | 6 N.m | 53 lb in |
| Compact Disc Changer Bolts | 6 N.m | 53 lb in |
| Compact Disc Changer Cover Bolts | 1.9 N.m | 17 lb in |
| Radio Antenna Cable Mounting Screw | 2.8 N.m | 25 lb in |
| Radio Antenna Cable Nut | 6 N.m | 53 lb in |
| Radio Antenna Mast | 5 N.m | 44 lb in |
| Radio Front Speaker Grille Mounting Screws | 1.9 N.m | 17 lb in |
| Radio Front Speaker Mounting Screws | 1.9 N.m | 17 lb in |
| Radio Rear Speaker Mounting Nuts | 1.2 N.m | 11 lb in |
| Radio to Instrument Panel Mounting Screws | 1.9 N.m | 17 lb in |
| Rear Console Trim Panel Retaining Screw | 1.9 N.m | 17 lb in |
| Steering Wheel Redundant Control Switch | 2 N.m | 20 lb in |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.