SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2001CHEVY EXPRESS G2500, VAN CARGO EXTENDED, 5.7 R, L31/KL8REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 379 (PERSONALIZATION SYSTEM)DESCRIPTION AND OPERATIONVEHICLE PERSONALIZATIONPROGRAMMING FEATURESREMOTE ACTIVATION VERIFICATION
2001 Chevrolet Chevy Express G2500, Van Cargo Extended, 5.7 R, L31/KL8

Remote Activation Verification

2001 Chevrolet Chevy Express G2500, Van Cargo Extended, 5.7 R, L31/KL8SECTION Remote Activation Verification
WARNING: This page is about a different car, the 2002 Buick Regal and 2002 Buick Century. However, it is still accessible from the selected car via links, so may be relevant.

Continue with the following steps in order to personalize the remote activation verification feature:

  1. Press and hold the driver side power door unlock switch to personalize the remote unlock verification.
  2. Press the UNLOCK button on the desired transmitter.

    The vehicle will remain in the current mode. The chime will sound a number of times equivalent to the mode number.

  3. Press the UNLOCK button on the desired transmitter again in order to advance to the next mode. Again the chime will sound a number of times equivalent to the mode number.
  4. Continue to press the UNLOCK button on the desired transmitter until the desired mode is reached.
  5. Press and hold the driver side power door lock switch to personalize the remote lock verification.
  6. Press the LOCK button on the desired transmitter.

    The vehicle will remain in the current mode. The chime will sound a number of times equivalent to the mode number.

  7. Press the LOCK button on the desired transmitter again in order to advance to the next mode. Again the chime will sound a number of times equivalent to the mode number.
  8. Continue to press the LOCK button on the desired transmitter until the desired mode is reached.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.