SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2001CHEVY EXPRESS G2500, VAN CARGO EXTENDED, 5.7 R, L31/KL8REPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 131 (ENGINE CONTROL SYSTEM - REMOVAL & INSTALLATION)IGNITION SYSTEMSIGNITION COILINSTALLATION
2001 Chevrolet Chevy Express G2500, Van Cargo Extended, 5.7 R, L31/KL8

Ignition Coil: Installation

2001 Chevrolet Chevy Express G2500, Van Cargo Extended, 5.7 R, L31/KL8SECTION Installation
WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the ignition coils (3).
  2. Install ignition coil mounting bolts (4). Tighten bolts to specification. See TORQUE SPECIFICATIONS  . See Figure .
  3. Install the wiring harness (1) and 2 harness retainer bolts (2). Tighten bolts to specification. See TORQUE SPECIFICATIONS  .
  4. Connect the ignition coil (3) wiring harness connectors (1). See Figure .
  5. Install engine cover (1). See Figure .
  6. Install engine cover (1) bolts. Tighten bolts to specification. See TORQUE SPECIFICATIONS  .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.