SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2001CHEVY EXPRESS G2500, VAN CARGO EXTENDED, 5.7 R, L31/KL8REPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE MECHANICALMECHANICALENGINE MECHANICAL - 5.0L & 5.7LREPAIR INSTRUCTIONSENGINE MOUNT REPLACEMENT - RIGHTINSTALLATION PROCEDURE
2001 Chevrolet Chevy Express G2500, Van Cargo Extended, 5.7 R, L31/KL8

Installation Procedure

2001 Chevrolet Chevy Express G2500, Van Cargo Extended, 5.7 R, L31/KL8SECTION Installation Procedure
  1. Install the mount and shield to the engine.
  2. Install the remaining bolts.

    Tighten 

    Tighten the bolts to 54 N.m (40 lb ft).

    Fig 1: Installing Engine Side Mount, Shield & Bolts
    G01688421Courtesy of GENERAL MOTORS CORP.
  3. Install the mount to the frame.
  4. Install the bolts.

    Tighten 

    Tighten the bolts to 58 N.m (43 lb ft).

  5. Lower the engine.
    Fig 2: Installing Engine Mount & Bolts
    G01688422Courtesy of GENERAL MOTORS CORP.
  6. Install the through-bolt and nut.

    Tighten 

    Tighten to 95 N.m (70 lb ft).

  7. Lower the vehicle.
  8. Connect the battery negative cable.
    Fig 3: Installing Through-Bolt & Nut
    G01688423Courtesy of GENERAL MOTORS CORP.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.