SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2001CAVALIER LS, 2.4 TREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 95 (ENGINE MECHANICAL - 2.2L)DESCRIPTION AND OPERATIONREPLACING ENGINE GASKETSASSEMBLING COMPONENTS
2001 Chevrolet Cavalier LS, 2.4 T

Assembling Components

2001 Chevrolet Cavalier LS, 2.4 TSECTION Assembling Components
WARNING: This page is about a different car, the 2003 Pontiac Sunfire and 2003 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
  • When assembling components, use only the sealant specified or equivalent in the service procedure.
  • Sealing surfaces should be clean and free of debris or oil.
  • Specific components such as crankshaft oil seals or valve stem oil seals may require lubrication during assembly.
  • Components requiring lubrication will be identified in the service procedure.
  • When applying sealant to a component, apply the amount specified in the service procedure.
  • Do not allow the sealant to enter into any blind threaded holes, as it may prevent the bolt from clamping properly or cause component damage when tightened.
  • Tighten bolts to specifications. Do not overtighten.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.