Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2001CAVALIER LS, 2.4 TREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 72 (ELECTRICAL COMPONENT LOCATOR)SWITCHES
2001 Chevrolet Cavalier LS, 2.4 T
Section 72 (Electrical Component Locator): Switches
2001 Chevrolet Cavalier LS, 2.4 TSECTION Switches
WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
SWITCHES LOCATION
| Component | Location |
|---|---|
| A/T Shift Lock Control Switch | Mounted on bracket, in front of brake pedal. |
| Automatic Transmission Fluid Pressure Manual Valve Position Switch | Inside transmission. |
| Back-Up Lamp Switch | On right side of manual transmission. |
| Brake Fluid Level Switch | In master cylinder reservoir. |
| Clutch Pedal Position Switch | On top of clutch pedal bracket. |
| Engine Oil Level Switch | Right side of oil pan. |
| Folding Top Ajar Indicator Switch | Integral to folding top lid latch. |
| Folding Top Release Switch | Under right side of storage compartment lid. |
| Park Brake Switch | On parking brake lever. |
| Park/Neutral Position Switch | On left side of transmission. |
| Rear Compartment Lid Ajar Switch | On left rear compartment lid latch. |
| Seat Belt Switch | In driver's seat belt buckle assembly. |
| Stoplight Switch | On top of brake pedal support. |
| Windshield Washer Fluid Level Switch | Inside solvent container. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.