Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Memory Seat and Memory Mirror Programming
The memory seat buttons allow for the recall of the comfort control temperature, fan speed and mode settings, radio presets, tone, volume, playback mode, last displayed station, compact disc position and tape direction as well as the seats, mirrors, and steering column. Perform the following actions in order to program the memory seats, the telescopic steering column, if equipped, and the memory mirrors for 3 separate drivers:
- Move the seat, the telescopic steering column, if equipped, and the sideview mirrors to the desired position.
- Press and hold the correct memory seat button for the specific driver until a chime is heard.
- Repeat the steps for the second driver.
- For the third driver, move the seat, the telescopic steering column, if equipped, and the sideview mirrors to the desired position.
- Press and hold both memory seat buttons simultaneously until a chime is heard.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.