SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2001CAVALIER LS, 2.4 TREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 278 (INTERIOR TRIM)REPAIR INSTRUCTIONSTRIM REPLACEMENT - LOCK PILLAR (UPPER CONVERTIBLE)INSTALLATION PROCEDURE
2001 Chevrolet Cavalier LS, 2.4 T

Installation Procedure

2001 Chevrolet Cavalier LS, 2.4 TSECTION Installation Procedure
WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Screw At Lock Pillar Upper Trim
    GM214020Courtesy of GENERAL MOTORS CORP.
  1. Install the lock pillar upper trim.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the screw securing the upper trim to the lock pillar.

    Tighten:  Tighten the lock pillar upper trim screw to 1.8 N.m (16 lb in).

  3. Install the spacer and washer to the seat belt guide stud.
    4. Fig 2: Seatbelt Upper Guide To Stud
    GM213980Courtesy of GENERAL MOTORS CORP.
  4. Install the upper seat belt guide.

    Tighten:  Tighten the upper guide nut to 40 N.m (29 lb ft).

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.