Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2001CAVALIER LS, 2.4 TREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 273 (LIGHTING SYSTEMS)REPAIR INSTRUCTIONSSTOP LAMP SWITCH ADJUSTMENT
2001 Chevrolet Cavalier LS, 2.4 T
Stop Lamp Switch Adjustment
2001 Chevrolet Cavalier LS, 2.4 TSECTION Stop Lamp Switch Adjustment
WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
- With the brake pedal depressed, insert the stop lamp/cruise control switch into the retainer until the switch body seats in the retainer. You will hear the CLICKS as the threaded portion of the switch is pushed through the retainer.
- Slowly pull the brake pedal fully rearward against the stop until you no longer hear the CLICK sound. The switch will be moved in the retainer providing proper adjustment.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.