SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2001CAVALIER LS, 2.4 TREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 273 (LIGHTING SYSTEMS)REPAIR INSTRUCTIONSFOG LAMP REPLACEMENT - REARREMOVAL PROCEDURE
2001 Chevrolet Cavalier LS, 2.4 T

Removal Procedure

2001 Chevrolet Cavalier LS, 2.4 TSECTION Removal Procedure
WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Rear Fog Lamp Socket At Rear Fog Lamp Assembly
    GM95549Courtesy of GENERAL MOTORS CORP.
  1. Remove the tail/turn signal lamp. Refer to Tail/Turn Signal Lamp Replacement (Europe, Japan) .
  2. Remove the rear fog lamp socket from the rear fog lamp assembly.

    Access the rear fog lamp through the tail lamp opening.

    3. Fig 2: Rear Fog Lamp Bezel At Lamp Assembly
    GM95547Courtesy of GENERAL MOTORS CORP.
  3. Remove the rear fog lamp bezel retaining nut and support the lamp assembly.
  4. Remove the bezel from the lamp.

    Lift the bezel off of the stud and pivot it out of the slot on the lamp.

  5. Remove the rear fog lamp assembly.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.