SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2001CAVALIER LS, 2.4 TREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 270 (WIRING SYSTEMS - SPECIFICATIONS, COMPONENT VIEWS AND CONNECTOR END VIEWS)COMPONENT LOCATORINLINE HARNESS CONNECTOR END VIEWSC220
2001 Chevrolet Cavalier LS, 2.4 T

Inline Harness Connector End Views: C220

2001 Chevrolet Cavalier LS, 2.4 TSECTION C220
WARNING: This page is about a different car, the 2004 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
C220 Instrument Panel Harness Terminal Identification To Vanity Mirror Jumper Harness

GM73135Courtesy of GENERAL MOTORS CORP.
Connector Part Information
  • 12047886
  • 8-Way F Metri-Pack 150 Series (BLK)
 Connector Part Information
  • 12045688
  • 8-Way M Metri-Pack 150 Series (BLK)
Pin Wire Color Circuit No. Function Pin Wire Color Circuit No. Function
A ORN 640 Battery Positive Voltage A ORN 640 Battery Positive Voltage
B BLK 150 Ground B BLK 150 Ground
C LT GRN 24 Backup Lamp Supply Voltage C LT GRN 24 Backup Lamp Supply Voltage
D GRY 1690 Automatic Day/Night Mirror Signal D GRY 1690 Automatic Day/Night Mirror Signal
E PNK 1691 Automatic Day/Night Mirror Low Reference E PNK 1691 Automatic Day/Night Mirror Low Reference
F ORN 740 Battery Positive Voltage F ORN 740 Battery Positive Voltage
G BRN 341 Ignition 3 Voltage G BRN 341 Ignition 3 Voltage
H - - Not Used H - - Not Used
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.