Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2001CAVALIER LS, 2.4 TREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 206 (ENTERTAINMENT SYSTEM)DIAGNOSTIC INFORMATION AND PROCEDURESSCAN TOOL DATA LIST
2001 Chevrolet Cavalier LS, 2.4 T
Scan Tool Data List
2001 Chevrolet Cavalier LS, 2.4 TSECTION Scan Tool Data List
WARNING: This page is about a different car, the 2004 Pontiac Sunfire and 2004 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
Radio Scan Tool Data List
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Ignition ON/Engine OFF/Radio ON | |||
| 8-Digit GM Part Number | Module Information | Numeric | 10317990 |
| Amplifier (U85 only) | System Configuration | Present/Not Present | Not Present |
| Antenna Signal | System Configuration | dBuV | 48dBuV |
| Band Number | System Configuration | FM/FM2/AM | FM1 |
| Calibration ID | Module Information | Numeric | 0005 |
| Cassette Cut Tape | Cassette Information | Numeric | 0 |
| Cass. Load/Unload Error | Cassette Information | Numeric | 0 |
| Cassette Inserted | Cassette Information | Yes/No | Yes |
| Cassette Metal | Cassette Information | Metal/Not Metal | Not Metal |
| Cassette Side | Cassette Information | Bottom/Top | Top |
| Cassette Tight Tape | Cassette Information | Numeric | 0 |
| CD Changer | System Configuration | Connected/Not Connected | Not Connected |
| CD Focus Errors | CD Information | Numeric | 0 |
| CD Load/Unload Errors | CD Information | Numeric | 0 |
| CD Tracking Errors | CD Information | Numeric | 0 |
| CD Inserted | CD Information | Yes/No | Yes |
| Driver Number | System Configuration | Driver 1/ Driver 2 | Driver 1 |
| Julian Date of Build | Module Information | Numeric | 031 |
| New VIN Counter | System Configuration | Numeric | 1 |
| Phone | System Configuration | Present/Not Present | Not Present |
| Preset Control | System Configuration | Preset 1-6/Not A Preset | Preset 1-6, if active radio station is a preset |
| PROM ID | Module Information | Numeric | 3090 |
| Sequence Number | Module Information | Numeric | 4292 |
| Single CD Track Number | CD Information | Numeric | 12 |
| Source | System Configuration | Off/Tuner/CD/Cassette | Tuner |
| Theft Armed | System Configuration | Yes/No/Learned VIN | Learned VIN |
| Theft Lock | System Configuration | Locked/Unlocked | Unlocked |
| Total Cassette Hours | Cassette Information | Hrs. | 1 |
| Total CD Hours | CD Information | Hrs. | 1 |
| Total Radio Hours | Module Information | Hrs. | 4 |
| Year Module Built | Module Information | Numeric | 2002 |
Digital Radio Receiver Scan Tool Data List
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Operating Conditions: Ignition ON/Engine OFF/Radio ON | |||
| 8-Digit GM Part Number | ID Information/Module Information | Numeric | Varies |
| Battery Voltage | Data | Volts | Varies |
| Component Serial Number | ID Information/Module Information | Numeric | Varies |
| Day | ID Information/DSP Software Version ID | Numeric | Varies |
| Day | ID Information/XM Software Version ID | Numeric | Varies |
| Digital Radio Antenna | Data | Millivolts or Milliamps | Varies |
| Ignition Counter | Data | Numeric | Varies |
| Month | ID Information/DSP Software Version ID | Numeric | Varies |
| Month | ID Information/XM Software Version ID | Numeric | Varies |
| Power Mode | Data | Alphanumeric | Run |
| Radio ID | ID Information/Module Information | Numeric | Varies |
| Software Version | ID Information/DSP Software Version ID | Numeric | Varies |
| Software Version | ID Information/XM Software Version ID | Numeric | Varies |
| Year | ID Information/DSP Software Version ID | Numeric | Varies |
| Year | ID Information/XM Software Version ID | Numeric | Varies |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.