Removal Procedure

2001 Chevrolet Cavalier LS, 2.4 TSECTION Removal Procedure
WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the roof lift off panel.
    Fig 1: Roof Lift Off Panel
    G01451565Courtesy of GENERAL MOTORS CORP.
  2. Remove the screws from the ends of the weatherstrip.
  3. Remove the weatherstrip from the weatherstrip retainer.
  4. Clean the surface with 3Mβ„’ adhesive remover P/N 8984 or equivalent.
    Fig 2: Weatherstrip From Weatherstrip Retainer
    G01451566Courtesy of GENERAL MOTORS CORP.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.