Tools Required

2001 Chevrolet Cavalier LS, 2.4 TSECTION Tools Required
WARNING: This page is about a different car, the 2003 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

J 41790Β  A/C Compressor Holding Fixture

  1. Remove the A/C compressor from the vehicle.
  2. Clamp the J 41790Β  in a vise and attach the A/C compressor to the J 41790Β  .
    Fig 1: Attaching A/C Compressor To J 41790
    G01418505Courtesy of GENERAL MOTORS CORP.
  3. Using internal snap ring pliers, remove the A/C compressor control valve retaining ring.
  4. Remove the A/C compressor control valve from the A/C compressor.
Fig 2: Removing A/C Compressor Control Valve From A/C Compressor
G01418506Courtesy of GENERAL MOTORS CORP.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.