Fastener Tightening Specifications

2001 Chevrolet Cavalier LS, 2.4 TSECTION Fastener Tightening Specifications
WARNING: This page is about a different car, the 2003 Pontiac Sunfire and 2003 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications

Application Specification
Metric English
Drain/Fill Plugs 38 N.m 28 lb ft
Intermediate Shaft Bolts 100 N.m 74 lb ft
Front Transmission Mount 75 N.m 55 lb ft
Rear Cover Bolts 25 N.m 18 lb ft
Rear Transmission Mount 75 N.m 55 lb ft
Reverse Switch 18 N.m 13 lb ft
Ring Gear 90 N.m 66 lb ft
Shaft Bolts 100 N.m 74 lb ft
Shifter Guide Bolts 25 N.m 18 lb ft
Shifter Mounting Bolts 25 N.m 18 lb ft
Speed Sensor Bolt 12 N.m 8 lb ft
Transmission Housing Bolts 25 N.m 18 lb ft
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.