Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2001CAVALIER LS, 2.4 TREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 134 (ENGINE MECHANICAL - 2.2L (L61) (UNIT REPAIR))REPAIR INSTRUCTIONSENGINE FLYWHEEL INSTALLATION
2001 Chevrolet Cavalier LS, 2.4 T
Engine Flywheel Installation
2001 Chevrolet Cavalier LS, 2.4 TSECTION Engine Flywheel Installation
WARNING: This page is about a different car, the 2002 Pontiac Sunfire and 2002 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
Tools Required
- J 36660-A Torque Angle Meter
- J 38122-A Crankshaft Balancer Holder
- Install the flywheel.
- Install the new bolts.
- Holding the crankshaft damper with the J 38122-A,
tighten the bolts evenly.
Tighten
Using the J 36660-A, tighten the bolts to 53 N.m (39 lb ft), plus 25 degrees.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.