Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2001CAVALIER LS, 2.4 TREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 131 (REAR SUSPENSION SYSTEM)SPECIFICATIONSNOTES
2001 Chevrolet Cavalier LS, 2.4 T
Section 131 (Rear Suspension System): Specifications: Notes
2001 Chevrolet Cavalier LS, 2.4 TSECTION Notes
WARNING: This page is about a different car, the 2002 Pontiac Sunfire and 2002 Chevrolet Cavalier. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Brake Pipe Fittings | 27 N.m | 20 lb ft |
| Brake Pipe Retainer Bolts | 6 N.m | 50 lb in |
| Coil Over Shock Absorber Adapter | 70 N.m | 52 lb ft |
| Hub and Bearing to Axle Bolt and Nuts | 60 N.m | 44 lb ft |
| Rear Axle Mounting Bolts | 120 N.m | 88 lb ft |
| Shock Absorber Lower Mounting Bolt | 70 N.m | 51 lb ft |
| Shock Absorber Mounting Upper Bolt to Body | 25 N.m | 18 lb ft |
| Shock Absorber Upper Mounting Nuts | 25 N.m | 18 lb ft |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.