Circuit Description

Left Door Control Module (LDCM) determines vertical position of left mirror from a signal sent by vertical position sensor. LDCM commands mirror memory recall settings based on voltage level LDCM receives back from vertical sensor. LDCM provides a 5-volt supply, a left-side mirror vertical sensor signal and a ground to vertical position sensor. When a memory setting is recalled, LDCM will command left mirror motor to move to a stored position sensor voltage previously set. LDCM monitors left mirror vertical position signal circuit and can determine if voltage level received is out of range.

DTC B2264 will set if LDCM detects left mirror vertical position sensor signal voltage range less than 0.10 volt or more than 4.78 volts for more than 2 seconds. DTC B2264 will store as a history code in LDCM memory. No driver warning will be displayed. DTC can only set as history even if malfunction is current.

Under all fault conditions, DTC B2264 will clear automatically if LDCM no longer detects left mirror vertical position sensor signal voltage range less than 0.10 volt or more than 4.78 volts for more than 2 seconds. Current and history DTCs can be cleared using scan tool or Instrument Panel Cluster (IPC) clearing DTCs feature.