Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2001CAVALIER LS, 2.4 TREPAIR AND DIAGNOSISBRAKESTRACTION CONTROLANTI-LOCK BRAKE SYSTEM WITH TRACTION CONTROL SYSTEM - DELPHI 7REMOVAL & INSTALLATIONELECTRONIC BRAKE CONTROL MODULE & BRAKE PRESSURE MODULATOR VALVE ASSEMBLYREMOVAL
2001 Chevrolet Cavalier LS, 2.4 T
Electronic Brake Control Module & Brake Pressure Modulator Valve Assembly: Removal
2001 Chevrolet Cavalier LS, 2.4 TSECTION Removal
- BPMV and EBCM assembly is located under brake master cylinder. EBCM and BPMV are individual units that are connected together. Disconnect negative battery cable.
- Disconnect EBCM harness connector ensuring connector tab is released by pushing down lock tab and slide connector cover. Disconnect BPMV pump motor ground cable. Label brakelines for installation reference and remove brakelines from BPMV.
- Remove EBCM and BPMV assembly from vehicle. To remove BPMV from EBCM, remove BPMV-to-EBCM mounting screws. Separate EBCM from BPMV by gently pulling apart. DO NOT pry apart using a tool. Replace seal, if damaged.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.