Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Code Enable Criteria
2001 Chevrolet Cavalier LS, 2.4 TSECTION Code Enable Criteria
- DTCs P0105, P0107, P0108, P0112, P0113, P0117, P0118, P0122, P0123, P0125, P0128, P0130, P0131, P0132, P0133, P0134, P0171, P0172, P0201-P0204, P0300, P0301-P0304, P0336, P0440, P0442, P0446, P0452, P0453, P0502, P0503, P1133, or P1441 are not set.
- ECT is more than 104°F (40°C).
- BARO is more than 72 kPa.
- Engine run time is more than 20 seconds.
- Ignition voltage is more than 11.3 volts.
DTC sets when:
- Actual engine speed is 100 RPM less than desired engine speed for 19 seconds for M/T.
- Actual engine speed is 60 RPM less than desired engine speed for 13 seconds for A/T.
- IAC command is more than 145 counts.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.