Fuse Block C1

2001 Chevrolet Cab & Chassis Silverado 2D Pickup, 8.1 G, 4WD, AutomaticSECTION Fuse Block C1
Fuse Block C1

GM362761
Connector Part Information
  • 12193906
  • 68-Way F Metri-Pack 280 Series (BLK)
Pin Wire Color Circuit No. Function
A1 BRN 141 Ignition 3 Voltage
A2 PNK 3 Ignition 1 Voltage
A3 YEL 143 Accessory Voltage
YEL 143 Accessory Voltage
A4 PNK 39 Ignition 1 Voltage
A5 YEL 1139 Ignition 1 Voltage
YEL 1139 Ignition 1 Voltage
A6 RED 542 Battery Positive Voltage
A7-A8 - - Not Used
A9 DK GRN 1001 RAP 1 Fuse Supply Voltage
A10 PPL 1697 Turn/Hazard Module Signal
A11 WHT 194 Door Unlock Control
A12 BLK 1850 Ground
B1 - - Not Used
B2 PNK 139 Ignition 1 Voltage
B3 - - Not Used
B4 GRY 8 Instrument Panel Lamp Supply Voltage - 1
GRY 8 Instrument Panel Lamp Supply Voltage - 1
B5 GRY 1696 Turn/Hazard Module 2 Supply Voltage
B6 BLK 755 RAP Relay Coil Control
B7 ORN 1440 Battery Positive Voltage
B8 TAN/BLK 254 Power Door Unlock Fuse Supply Voltage
B9 - - Not Used
B10 BRN 541 Ignition 3 Voltage
B11 WHT 194 Door Unlock Control
B12 LT BLU 195 Door Lock Control
C1 BRN 441 Ignition 3 Voltage
C2 - - Not Used
C3 YEL 43 Accessory Voltage
C4 DK GRN 44 Instrument Panel Lamps Dimmer Switch Signal
C5-C7 - - Not Used
C8 BRN 2409 Interior Park Lamps Supply Voltage
BRN 2409 Interior Park Lamps Supply Voltage
C9 ORN 2140 Battery Positive Voltage
C10 BRN 2409 Interior Park Lamps Supply Voltage
C11 TAN 126 Left Front Door Open Switch Signal
C12 WHT 156 Courtesy Lamp Low Control
WHT 156 Courtesy Lamp Low Control
D1 BRN 541 Ignition 3 Voltage
D2 BRN 241 Ignition 3 Voltage
D3 PNK 1020 Off/Run/Crank Voltage
PNK 1020 Off/Run/Crank Voltage
D4 PNK 739 Ignition 1 Voltage
PNK 739 Ignition 1 Voltage
D5 LT GRN 2806 Crank Voltage
D6-D7 - - Not Used
D8 LT BLU 74 Park Lamp Switch Signal
D9 - - Not Used
D10 ORN 1732 Courtesy Lamps Supply Voltage (Uplevel)
D10 GRY 118 Left Front Speaker Output (-) (Base Pickup)
D11 - - Not Used
D12 DK BLU 1307 Power Window Master Switch Lockout Signal (Crewcab/Utility)
D12 TAN 201 Left Front Speaker Output (+) (Base Pickup)
E1 - - Not Used
E2 BRN 41 Ignition 3 Voltage
BRN 41 Ignition 3 Voltage
E3 BRN 441 Ignition 3 Voltage
E4 YEL 243 Accessory Voltage
E5 DK GRN 1301 RAP 1 Fuse Supply Voltage (Radio)
DK GRN 1301 RAP 1 Fuse Supply Voltage (Radio)
E5 BLK 707 RAP Relay Coil Supply Voltage (OnStar - VIU)
E6 LT BLU 1508 Turn/Hazard Module Supply Voltage
E7 BLK 707 RAP Relay Coil Supply Voltage
E8 LT BLU 74 Park Lamp Switch Signal
E9 - - Not Used
E10 LT GRN 1391 Left Front Door Lock Relay Control
E11-E12 - - Not Used
F1 BRN 341 Ignition 3 Voltage
F2 BRN 41 Ignition 3 Voltage
BRN 41 Ignition 3 Voltage
F3 BRN 341 Ignition 3 Voltage
F4 GRY/BLK 255 Power Door Lock Fuse Supply Voltage
F5 LT GRN/BLK 584 A/T Shift Lock Control Switch Supply Voltage
F6 WHT 156 Courtesy Lamp Low Control
WHT 156 Courtesy Lamp Low Control
F7 ORN 1440 Battery Positive Voltage
F8-F11 - - Not Used
F12 LT BLU 195 Door Lock Control
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.