Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Module Information 2
- Lighting Calibration Number
-
The scan tool displays the lighting configuration calibration part number in the BCM.
- Lighting Suffix
-
The scan tool displays the lighting configuration identification number in the BCM.
- Reminder Calibration Number
-
The scan tool displays the reminder warning calibration part number in the BCM.
- Reminder Suffix
-
The scan tool displays the reminder warning identification number in the BCM.
- Retained Accessory Power (RAP) Calibration Number
-
The scan tool displays the RAP calibration part number in the BCM.
- Retained Accessory Power (RAP) Suffix
-
The scan tool displays the RAP identification number in the BCM.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.