Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSCHEVROLET2000CAVALIER BASE, 4D SEDAN, 2.4 TREPAIR AND DIAGNOSISBODY & FRAMEBODY, CAB CONTROL SYSTEMSBODY CONTROL MODULESSELF-DIAGNOSTIC SYSTEMBODY CONTROL SYSTEM DIAGNOSTIC SYSTEM CHECK

2000 Chevrolet Cavalier Base, 4D Sedan, 2.4 T

Body Control System Diagnostic System Check

2000 Chevrolet Cavalier Base, 4D Sedan, 2.4 TSECTION Body Control System Diagnostic System Check

Connect scan tool to Data Link Connector (DLC). If scan tool powers up, go to next step. If scan tool does not power up, go to SCAN TOOL DOES NOT POWER UP .
Turn ignition on. Attempt to establish communication with Body Control Module (BCM). If scan tool communicates with BCM, go to next step. If scan tool does not communicate with BCM, go to SCAN TOOL DOES NOT COMMUNICATE WITH CLASS 2 DEVICE .
If any communication DTCs exist (DTCs beginning with a "U"), go to SCAN TOOL DOES NOT COMMUNICATE WITH CLASS 2 DEVICE . If no communication DTCs exist, perform appropriate test. See BODY CONTROL SYSTEM DIAGNOSTIC TROUBLE CODE INDEX table.

BODY CONTROL SYSTEM DIAGNOSTIC TROUBLE CODE INDEX

DTC ⁽¹⁾

Description

B0005

⁽²⁾ Park Brake Switch Circuit Malfunction

B0016

⁽³⁾ Right Front Deployment Loop Resistance Low

B0017

⁽³⁾ Right Front Deployment Loop Open

B0018

⁽³⁾ Right Front Deployment Loop Short To Ground Or Voltage Out Of Range

B0022

⁽³⁾ Left Front Deployment Loop Resistance Low

B0024

⁽³⁾ Low Front Deployment Loop Short To Ground Or Voltage Out Of Range

B0026

⁽³⁾ Left Front Deployment Loop Open

B0035

⁽³⁾ ADS Closed/Shorted to Ground

B0036

⁽³⁾ ADS Open, Missing Or Shorted To Battery

B0051

⁽³⁾ Deployment Commanded

B0053

⁽³⁾ Deployment Commanded With Loop Malfunctions Present

B1000

BCM Malfunction

B1001

Option Configuration Error

B1328

⁽⁴⁾ Device Power Circuit High

B1372

Ignition 1 Circuit Low

B1382

Ignition ACC Circuit Low

B2532

⁽⁵⁾ Foglight Relay Output Short To Ground Or Open

B2533

⁽⁵⁾ Foglight Relay Output Short To Battery

B2558

⁽⁶⁾ Interior Light Control Output Short To Battery

B2600

⁽⁵⁾ DRL Error

B2601

⁽⁵⁾ DRL Stuck

B2602

⁽⁵⁾ DRL Relay Output Short To Ground Or Open

B2603

⁽⁵⁾ DRL Relay Output Short To Battery

B2624

⁽⁶⁾ Display Dimming PWM Input Circuit Open

B2625

⁽⁶⁾ Display Dimming PWM Input Circuit Malfunction

B2662

⁽⁶⁾ Park Light Switch Circuit Malfunction

B2707

⁽⁷⁾ Gearshift Unlock Circuit Low

B2708

⁽⁷⁾ Gearshift Unlock Circuit High

B2752

⁽⁸⁾ Horn Relay Coil Circuit Low

B2753

⁽⁸⁾ Horn Relay Coil Circuit High

B2947

⁽⁹⁾ Security System Sensor Power Circuit Low

B2948

⁽⁹⁾ Security System Sensor Power Circuit High

B2957

⁽⁹⁾ Security System Sensor Data Circuit Low

B2958

⁽⁹⁾ Security System Sensor Data Circuit High

B2960

⁽⁹⁾ Security System Sensor Data Incorrect But Valid

B2965

Key In Ignition Fault

B3031

⁽⁹⁾ Security System Controller In Learn Mode

B3033

⁽⁹⁾ Security System Indicates Tamper

B3127

⁽¹⁰⁾ Driver Door Unlock Output Short To Ground

B3132

⁽¹⁰⁾ All Door Unlock Output Circuit Short To Ground

B3133

⁽¹⁰⁾ All Door Unlock Output Circuit Short To Battery

B3137

⁽¹⁰⁾ All Door Lock Output Circuit Short To Ground

B3138

⁽¹⁰⁾ All Door Lock Output Circuit Short To Battery

U1000 & U1255

Class 2 Communication Malfunction

U1001- U1254

⁽¹¹⁾ Loss Of Communications With XXX

U1300

⁽¹¹⁾ Class 2 Data Link Low

U1301

⁽¹¹⁾ Class 2 Data Link High

⁽¹⁾	Perform appropriate test under DIAGNOSTIC TESTS .

⁽²⁾	Diagnose and repair circuit as necessary. See WIRING DIAGRAMS in appropriate ANALOG INSTRUMENT PANELS article.

⁽³⁾	For information on air bag DIAGNOSIS & TESTING, see lemon-25(R) AIR BAG SERVICE & REPAIR MANUAL, DOMESTIC & IMPORTED MODELS.

⁽⁴⁾	Diagnose and repair charging system as necessary. See appropriate GENERATORS & REGULATORS article in STARTING & CHARGING SYSTEMS.

⁽⁵⁾	Diagnose and repair circuit as necessary. See HEADLIGHT SYSTEMS & DAYTIME RUNNING LIGHTS article.

⁽⁶⁾	Diagnose and repair circuit as necessary. See ILLUMINATION/INTERIOR LIGHTS article.

⁽⁷⁾	See appropriate ELECTRONIC CONTROLS article in AUTOMATIC TRANSMISSIONS.

⁽⁸⁾	Diagnose and repair horn circuit as necessary. See WIRING DIAGRAMS in appropriate STEERING COLUMN SWITCHES article.

⁽⁹⁾	See appropriate ANTI-THEFT SYSTEMS article.

⁽¹⁰⁾	See appropriate POWER DOOR LOCKS article.

⁽¹¹⁾	Go to SCAN TOOL DOES NOT COMMUNICATE WITH CLASS 2 DEVICE.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.