Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2000CAB & CHASSIS K2500, 7.4 J, AUTOMATICREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 728 (INSTRUMENT PANEL, GAUGES & CONSOLE)REPAIR INSTRUCTIONSCONSOLE REPLACEMENT (BASE CONSOLE)INSTALLATION PROCEDURE
2000 Chevrolet Cab & Chassis K2500, 7.4 J, Automatic
Installation Procedure
2000 Chevrolet Cab & Chassis K2500, 7.4 J, AutomaticSECTION Installation Procedure
WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- The new console is attached to a bracket. Separate the center console from the bracket by removing the retaining bolts.
- Position the new center console on the bracket in the vehicle.
- Install the 4 retaining bolts to the bracket. Tighten the bolts to 3.5 N.m (31 lb in).
- Close the center console door.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.