Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2000CAB & CHASSIS K2500, 7.4 J, AUTOMATICREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1619 (ENGINE MECHANICAL - 2.4L (LAT))REPAIR INSTRUCTIONSON-VEHICLE REPAIR INSTRUCTIONSENGINE MOUNT BRACKET REPLACEMENTINSTALLATION PROCEDURE
2000 Chevrolet Cab & Chassis K2500, 7.4 J, Automatic
Installation Procedure
2000 Chevrolet Cab & Chassis K2500, 7.4 J, AutomaticSECTION Installation Procedure
WARNING: This page is about a different car, the 2007 Saturn Vue. However, it is still accessible from the selected car via links, so may be relevant.
- Position the engine mount bracket to the engine.
- Install the engine mount bracket bolts in the following locations:
- The long bolts in the forward and lower front holes
- The short bolt in the upper rear hole
- Tighten the engine mount bracket bolts in the following sequence.
- Upper Left
- Lower Left
- Right
Tighten: Tighten the bolts to 100 N.m (74 lb ft).
- Install the engine mount. Refer to Engine Mount Replacement .
NOTE:
Refer to Fastener Notice
.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.