Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2000CAB & CHASSIS K2500, 7.4 J, AUTOMATICREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 122 (ENGINE CONTROLS - SELF-DIAGNOSTICS - 4.8L, 5.3L & 6.0L)DIAGNOSTIC TESTSDTC P0121: TP SENSOR PERFORMANCECONDITIONS FOR SETTING DTC
2000 Chevrolet Cab & Chassis K2500, 7.4 J, Automatic
Conditions For Setting DTC
2000 Chevrolet Cab & Chassis K2500, 7.4 J, AutomaticSECTION Conditions For Setting DTC
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, and 2002 Chevrolet Tahoe. However, it is still accessible from the selected car via links, so may be relevant.
- The TP sensor reading is more than a predicted value when the MAP is less than 55 kPa.
- The TP sensor reading is less than a predicted value when the MAP is more than 65 kPa.
- The above conditions are present for 15 seconds.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.