SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSCHEVROLET2000CAB & CHASSIS C2500, 6.5 F, AUTOMATICREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 467 (COMPUTER RELEARN PROCEDURES)ENGINE CONTROL MODULE OR POWERTRAIN CONTROL MODULESERVICE PROGRAMMING SYSTEM REMOTE PROCEDURE (EXCEPT CORVETTE)NOTES
2000 Chevrolet Cab & Chassis C2500, 6.5 F, Automatic

Service Programming System Remote Procedure (Except Corvette): Notes

2000 Chevrolet Cab & Chassis C2500, 6.5 F, AutomaticSECTION Notes
WARNING: This page does not describe the selected car, but rather 60 other vehicles, including the 2003 Saturn Vue, 2003 Saturn LW300, 2003 Saturn LW200, 2003 Saturn L300, and 2003 Saturn L200. However, it is still accessible from the selected car via links, so may be relevant.

The Remote Service Programming System (SPS) method is a 3-step process that involves the following procedures:

  1. Connecting the Tech 2 to the vehicle and obtaining the information from the module.
  2. Connecting the Tech 2 to the terminal and downloading a new calibration file from the terminal into the Tech 2 memory.
  3. Reconnecting the Tech 2 to the vehicle and uploading the new calibration file into the module.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.